NEC NEAX 2000 Programming Manual page 815

Integrated voice server, integrated multimedia exchange
Hide thumbs Also See for NEAX 2000:
Table of Contents

Advertisement

ATTENDANT TERMINAL - D
SERVICE CONDITIONS (CONT'D)
6. Use of the RLS key during a call in progress will terminate that call, unless a transfer is in progress, in
which case a transfer occurs. (The RLS key acts the same as going on-hook.)
7. The associated LED for MW, DND or NT on the DSS CONSOLE will light steady green when in use,
and be off when canceled.
8. The associated LED for each station assigned MW or DND is lit steady green while it is set, but is dis-
played only when the Attendant Terminal user activates the Message Waiting mode or Do Not Disturb
mode.
9. Direct trunk line appearances may be assigned to the Attendant Terminal. Operation is the same as for
a normal Attendant Terminal. Attendant Console type operation is not available with direct trunk line
appearances.
10. For operator calls from Tie Lines, the outside party must dial a virtual line number associated with an
operator position.
11. An NT key may be assigned to an Attendant Terminal when no master Attendant Terminal or no sta-
tion for DAY/NIGHT MODE CHANGE BY STATION DIALING is provided by the tenant.
term
ND-91285-001(E)
DECEMBER, 1999
(CONT'D)
Revision 1.0
(2/2)
Page 33

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Neax 7400 ics m100mx

Table of Contents