Guest Name Display Through Pms - NEC NEAX 2000 Programming Manual

GUEST NAME DISPLAY THROUGH PMS

PROGRAMMING
For programming of the PMS, refer to "PMS INTERFACE".
START
CM08
Provided the system with Name Display
service.
Specify the time to go back to Data and
Time display after the call answered.
Specify the duration to display the name.
CM35 Assign a trunk name number to each trunk
route.
Enter the desired station user name to
CM77
each station number by CM77 Y=0 or Y=1.
A
DESCRIPTION
GUEST NAME DISPLAY THROUGH PMS
page 682
(1) 255
(2) 1 : To provide
(1) 120
(2) 0 : 10 sec. later
1 : 6 sec. later
(1) 121
(2) 0 : Until call finished
1 : As per CM08>120
Y=03
•
(1) 00-63: Trunk Route No.
(2) 00-14: Trunk Name No.
15 : Kind of trunk route assigned by
CM35 Y=00 are displayed
16-63: Trunk Name No.
Y=0 By Character Code
•
(1) X-XXXX: Station No.
(2) 20-7F: Character Code
Max. 32 digits
See APPENDIX B: CHARACTER
CODE TABLE.
Y=1 By Character
•
(1) X-XXXX: Station No.
(2) A-Z, 0-9: Character
Max. 16 characters
– 662 –
DATA
A2653-10