NEC NEAX 2000 Programming Manual page 79

When the 1st and/or the 2nd answering message is required: CM30 Y=30, 31>2nd data 08,
CM64 Y=0>2nd data 02, or Night Message is required: CM64 Y=2>2nd data 02, do the following
programming.
START
CM10 Assign the Digital Announcement Trunk
card number to the required LEN.
The Digital Announcement Trunk
NOTE:
card number must be assigned
to the first LEN (Level 0), the
third LEN (Level 2), the fifth LEN
(Level 4) and the seventh LEN
(Level 6) of each LT slot.
CM49 Assign the function of the Digital An-
nouncement Trunk.
Assign the Message number to the re-
quired tenants.
CM20 To record, replay, or delete a message, as-
sign the respective Digital Announcement
Trunk access codes.
A
DESCRIPTION
(1) 000-763: LEN
(2) EB002-EB127: Digital Announcement
For PIM0/1: EB002-EB031
For PIM2/3: EB032-EB063
For PIM4/5: EB064-EB095
For PIM6/7: EB096-EB127
NOTE:
Y=00
•
(1) 000-001: Built-in DAT on MP card
002-127: Digital Announcement Trunk
(2) 01XX: 1st Answering Message
02XX: 2nd Answering Message/Night
Message
XX : 00-63: Message No.
Y=01 For 1st Answering Message
•
Y=02 For 2nd Answering Message/
•
Night Message
(1) XX: 00-63: Tenant No.
(2) XX: 00-63: Message No. assigned by
Y=0-3 Numbering Plan Group 0-3
•
(1) X-XXXX: Access Code
(2) A100: Record
A101: Replay
A102: Delete
– 59 –
AUTOMATED ATTENDANT
DATA
Trunk Card No.
EB000 and EB001 are dedi-
cated to built-in Digital An-
nouncement Trunk of the MP
card.
Card No. (EB002-EB127) as-
signed by CM10
CM49 Y=00
A2056-10