Ckp Pulse Plate Replacement - Honda Accord 2008 Manual

07/11/02 09:10:02 61TA0000_070_0031
25. Install the oil pump (see page 8-22).
26. Install the oil pan (see page 7-32).
27. Install the cylinder head:
• All models except PZEV (see page 6-46)
• PZEV model (see page 6-98)
28. M/T model: Install the flywheel (see step 18 on
page 12-17), the clutch disc (see page 12-16), and
the pressure plate (see page 12-15).
29. A/T model: Install the drive plate (see page 14-269).
30. Install the transmission:
• Manual transmission (see page 13-16)
• Automatic transmission (see page 14-255)
31. Install the engine/transmission (see page 5-12).
NOTE: Whenever any crankshaft or connecting rod
bearing is replaced, run the engine at idle until it
reaches normal operating temperature, then
continue to run it for about 15 minutes.

CKP Pulse Plate Replacement

1. Remove the crankshaft (see page 7-15).
2. Remove the CKP pulse plate (A).
A
3. Install the CKP pulse plate in the reverse order of
removal.
ＴＡ０８ＡＥ４Ａ１８３１６６１７５１９ＫＢＡＴ００
8 x 1.0 mm
22 N·m
(2.2 kgf·m, 16 lbf·ft)
Apply new engine oil.
7-31 7-31
＊０１