Dell C9000 Series Reference Manual page 2052

notification-
option
Defaults Not enabled.
Command Modes CONFIGURATION
Command History
This guide is platform-specific. For command information about other platforms, see
the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
9.9(0.0)
9.2(1.0)
9.1(0.0)
8.3.19.0
8.3.11.1
8.3.7.0
8.4.1.0
7.6.1.0
7.5.1.0
• stp — Enable notification of a state change in the
spanning tree protocol (RFC 1493).
• vlt — Enable notification of VLT state changes.
• vrrp —Enable notification of a state change in a VRRP
group.
• xstp — Enable notification of a state change in MSTP
(802.1s), RSTP (802.1w), and PVST+.
For the envmon notification-type, enter one of the following
optional parameters:
•
cam-utilization
•
fan
•
supply
•
temperature
For the snmp notification-type, enter one of the following
optional parameters:
•
authentication
•
coldstart
•
linkdown
•
linkup
Description
Introduced on the C9010.
Introduced on the Z9500.
Added support for copy-config and ecmp traps.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Added support for VRRP traps.
Added support for STP and xSTP traps. Introduced on the S-
Series.
Introduced on the C-Series.
Simple Network Management Protocol (SNMP) and Syslog 2052