Contact-Person - Dell S6100 Configuration Manual

Parameters
company-name
company-next-
name
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
You can configure only one contact-company.
It is not possible to remove the components of the company name. The no form of the command removes the
entire contact-company entry.
This command is optional for SupportAssist service configuration.

contact-person

Configure the contact name for an individual.
Syntax contact-person [first <first-name>] last <last-name>
To remove the contact person and all their details, use the no contact-person [first <first-name>]
last <last-name> command.
Parameters
first-name
last-name
Command Modes SUPPORTASSIST
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Enter the name for the company. If there are multiple words in the name, use optional
additional fields.
(OPTIONAL) Enter the next components of the company name, up to 5 components are
allowed.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
(Optional) Enter the first name for the contact person. This is optional provided each
contact person name is unique. To include a space, enter a space within double quotes.
Enter the last name for the contact person. To include a space, enter a space within
double quotes.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
SupportAssist 1583