Support-Assist Activity - Dell S6100 Configuration Manual

Version
9.11(0.0)
9.10(0.1)
9.10(0.0)
9.10(0.0)
9.9(0.0)
Usage Information
You are guided through a series of queries to configure SupportAssist. The generated commands are added to the
running configuration, including the DNS resolve commands, if configured.
This command starts the configuration wizard for the SupportAssist. At any time, you can exit by entering Ctrl-C. If
necessary, you can skip some data entry.
Once you exit the wizard, the Dell Networking OS starts a full transfer.

support-assist activity

Trigger an activity event immediately.
Syntax support-assist activity {full-transfer | core-transfer} start now
Parameters
full-transfer
core-transfer
Command Modes EXEC Privilege
Command History
This guide is platform-specific. For command information about other platforms, see the relevant Dell Networking
OS Command Line Reference Guide.
Version
9.11(0.0)
9.10(0.0)
9.9(0.0)
Usage Information Use the command to trigger the activity that enables transfer of information. You can choose a full transfer that
includes all the details or core transfer that includes only the core files.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the S6010-ON and S4048T-ON.
Introduced on the S3148.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
Enter the keyword full-transfer to specify transfer of configuration, inventory, logs,
and other information.
Enter the keyword core-transfer to specify transfer of core files.
Description
Introduced on the M I/O Aggregator and FN IOM.
Introduced on the C9010, Z9100–ON, S6100–ON, and S3100 series.
Introduced on the S4810, S4820T, S3048–ON, S4048–ON, S5000, S6000, S6000–ON,
Z9500, MXL.
NOTE: The full transfer includes the core files as well in the information sent. The core transfer does
not send core files that are older than 30 days.
SupportAssist 1581