Toner Low Rap; Print Cartridge Warning Rap - Xerox phaser 3635 Service Manual

Hide thumbs Also See for phaser 3635:
Table of Contents

Advertisement

09-100 Toner Low RAP

09-100 The machine has detected that the print cartridge is almost empty.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
No immediate action is necessary. Ensure that a replacement print cartridge, PL 9.10
Item 1, is in stock.
NOTE: The toner low message is based on a pixel count, not a signal from a sensor. It
cannot be reset by shaking the toner cartridge.
Draft 4
Phaser 3635MFP

09-350 Print Cartridge Warning RAP

09-350 The print cartridge is near the end of the design life. The design life is 10,000 print
pages.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
1.
No immediate action is necessary. Ensure that a replacement print cartridge, PL 9.10
Item 1, is in stock.
2-29
WARNING
Status Indicator RAPs
09-100, 09-350

Advertisement

Table of Contents
loading

Table of Contents