Table of Contents
Advertisement
Setting the Date and Time
The Agilent 86121A uses an internal clock to stamp files
and printouts with the time and date. To make sure files
are dated correctly, use the following steps to set the
date and time.
To set the date and time
1 Press the Setup key.
2 Press the MORE softkey.
3 Press the MORE softkey again.
4 Press the CLOCK softkey.
5 Press DATE to adjust the year, month and day. Press
RETURN when you are done.
6 Press TIME to adjust the hour, minute and seconds. Press
RETURN when you are done.
Setting the Date and Time 3-27
Advertisement
Table of Contents
