Setting The Internal Clock; Setting The Date/Time - Agilent Technologies Twelfth 4287A RF LCR Operation Manual

Setting the Internal Clock

You can set the date/time displayed at the lower right of the screen. When you save data in
the storage unit, for example, the internal clock data will be used. The following describes
the setting procedure that uses keys on the front panel.
NOTE
When turning on the instrument power for the first time after delivery, always be sure to set
the internal clock.

Setting the Date/Time

Step 1. Press the
dialog box will appear (Figure 2-23).
Figure 2-23 Date/Time Properties Dialog Box ("Date & Time" Tab)
Step 2. Turn the rotary knob (
press the
Chapter 2
[System] key and press Set Date and Time
)on the front panel to point the focus to the
[→] key to move the focus to the
Setting the Internal Clock
button the Date/Time Properties
Date & Time
Time Zone tab (Figure 2-24).
Installation Guide
tab and
43