Date And Time Display - Agilent Technologies ESA Series User's/Programmer's Reference

Remote Command Reference
DISPlay Subsystem
Allows you to set the format for displaying the real-time clock. To set the date time
use: SYSTem:DATE <year>, <month>, <day>.
Factory Preset
and *RST: The factory default is MDY. This parameter is persistent, which
means that it retains the setting previously selected, even
through a power cycle.
Front Panel
Access: System, Time/Date, Date Format MDY DMY

Date and Time Display

:DISPlay:ANNotation:CLOCk[:STATe] OFF|ON|0|1
:DISPlay:ANNotation:CLOCk[:STATe]?
Turns on and off the display of the date and time on the spectrum analyzer screen.
Factory Preset
and *RST: The factory default is On. This parameter is persistent, which means
that it retains the setting previously selected, even through a power cycle. Front
Panel
Access:
System, Time/Date, Time/Date On Off
Display Annotation Title Data
:DISPlay:ANNotation:TITLe:DATA <string>
:DISPlay:ANNotation:TITLe:DATA?
Enters the text that will be displayed in the user title area of the display.
Front Panel
Access:
Display, Title
Display, Title, Change Title
Display, Title, Clear Title
Turn the Entire Display On/Off
:DISPlay:ENABle OFF|ON|0|1
Turns the display on or off. Having the display turned off may increase repetitive
measurement rate.
The following key presses will turn display enable back on:
1. If in local, press any key
2. If in remote, press the local (system) key
274 Chapter 5