Saving A Data Array In Touchstone Format - Agilent Technologies 4294A Operating Manual

Saving a data array in touchstone format

You can save 4294A's data array as a file in the touchstone format, based on the 1 port
model, in a storage device.
Step 1. Press the
Step 2. Press the
Step 3. Select one of the 4294A's storage devices.
Storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
NOTE
When you use the floppy disk drive, insert a floppy disk into it.
You cannot save data on a floppy disk that is write-protected. Make the disk write-enabled
before inserting it.
The setting of the storage device you select using
MASS STORE [ ]
Instrument BASIC function, and it is different from the selection of the storage device
using the
Step 4. Press the
of the key label of the
[ ]
Softkey label
STORE DEV [FLOPPY]
STORE DEV [MEMORY]
STORE DEV [FLASH]
Step 5. Press the
Step 6. Use the following keys to enter a file name in the string entry line.
Chapter 8
Save and Recall the Agilent 4294A Internal Data
key to display the save menu.
[Save]
key to display the storage device menu.
STORE DEV [ ]
is applied when using the 4294A's storage devices from the HP
key here. However, the storage devices themselves are common.
STORE DEV [ ]
key to return to the save menu. The selected storage device is displayed in
return
STORE DEV [ ]
key to display the data save menu.
TOUCHSTONE
Analysis and Processing of Result
Key operation
FLOPPY
MEMORY
FLASH MEMORY
[System] - IBASIC - more 1/3 -
key.
Selected storage device
Floppy disk drive
Volatile memory disk
Nonvolatile memory disk (flash memory)
285