To load ENR data from memory
Step 1. If the ENR file is on diskette, insert the diskette into the floppy drive of
the Noise Figure Analyzer.
Step 2. Press the
File
Step 3. Press the
Load
Step 4. Press the
ENR
Step 5. Press either the
A list of available files on the [-A-] or [-C-] drive is displayed. Use the
arrow keys to access the appropriate file.
Step 6. Press the
Enter
Saving an ENR Table
You can save an ENR table to the Noise Figure Analyzer's internal
memory or to floppy disk as follows:
Step 1. Press the
File
Step 2. Press the
Save
Step 3. Press the
ENR
Step 4. Press either the
The
Alpha Editor
Step 5. Input the name of the ENR table.
Step 6. Select using the arrow keys whether you want to save the files to the
[-A-] or [-C-] drive.
Step 7. Press
Enter
Chapter 2
key to access the File Manager.
menu key to access the file system.
menu key.
or
Meas Table
Cal Table
key.
key.
menu key.
menu key.
or
Meas Table
Cal Table
now appears, allowing you to create a name for the file.
to terminate.
Making Basic Measurements
Entering ENR Data
menu key.
menu key.
27