Saving Measurement Results; Saving In Textual (Csv) Form - Agilent Technologies 8753ET Manual Supplement

Saving Measurement Results

Saving in Textual (CSV) Form

Textual measurement results can be saved in a comma-separated value (CSV) format and
imported into a spreadsheet application. Additional information is also saved as a
preamble to the measurement results. The saved information includes:
• network analyzer model number and firmware version
• date the file was saved
• type of measurement being done
• start and stop frequencies
• sweep time
• port power
• IF bandwidth
• channel number
• number of points
• format
• the frequency (or time) and the real and imaginary measurement values for each of
points measured
1. Press
Save/Recall
2. Make sure that
TEXT FMT [CSV]
3. Make sure that
FILETYPE: TEXT
softkey so that TEXT is underlined.
4. Insert a 3.5-inch floppy disk in the network analyzer's disk drive.
5. Press
SAVE FILE
The text file may be retrieved from the floppy disk on personal computer and can be
imported into an application that accepts text in the comma-separated value format,
such as a spreadsheet.
Supplement for the User's Guide (Firmware Version 7.66)
SAVE FILE FORMATS
is displayed.
is underlined. If it is not underlined, press the
to save the display information as text in the CSV format.
Saving Measurement Results
.
1-33