Saving And Recalling Power Meter Configurations - Agilent Technologies E4418B User Manual

Power Meter Operation

Saving and Recalling Power Meter Configurations

Saving and Recalling Power Meter Configurations
To reduce repeated setup sequences, up to ten power meter configurations can be
stored in the power meter's non-volatile memory. The GP-IB address and command
set, the data stored in the sensor calibration tables and the zeroing and calibration data
are not stored by a preset. The calibration table selected is not affected.
Power meter configurations are saved and recalled with the
To save the current measurement setup:
Save
1. Press .
Recall
2. Use the and
the required file is highlighted press
3. Press
Confirm
If you require to modify the name of a file:
Save
1. Press .
Recall
2. Use the and
the required file is highlighted press
displays the file name in a pop up window. Modify this name (see below)
until the desired name is displayed.
Use
n
currently positioned.
Use
n
Use
Insert Char
n
3. To confirm your choice press
To recall a measurement setup:
Save
1. Press .
Recall
2. Use the and
the required file is highlighted press
3. Press
Confirm
2-60
hardkeys to scroll through the displayed files. When
Save
.
hardkeys to scroll through the displayed files. When
Edit Name
or to modify the character on which the cursor is
or to move to other characters.
and
Delete Char
.
Enter
hardkeys to scroll through the displayed files. When
Recall
.
Save
hardkey.
Recall
.
. The power meter
as required.
.
Agilent E4418B User's Guide