8r
vsvtÃAvir
Ã8hiyvt
TrvtÃVÃhÃ6r
Choosing the Test Configuration
Setting the Loss Limit
4−10
To choose either single-ended or double-ended testing:
1 On the Fiber Autotest Settings screen, press Setup, then press Edit.
The test Configuration Setup screen displays.
2 Press either Double Ended or Single Ended, then press OK. The
Fiber Autotest Settings screen displays, with the selected
configuration next to Setup.
To set the loss limit for fiber testing:
1 On the Fiber Autotest Settings screen, press Loss Limit, then Edit.
The Loss Limit Setup screen displays.