Ruijie Networks RG-S2600E Series Cli Reference Manual page 93

S2600E/P CLI Reference Guide
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
1.1.13 mtu
Use this command to set the MTU supported on the interface.
mtu num
Parameter
description
Default
configuration
Chapter 1 Interface Configuration Commands
Auto-select the medium type for the
auto-select
interface.
Copper interface.
copper
Copper interface.
Interface configuration (physical interface, except for AP
and SVI)
If a port can be selected as an optical port or electrical
port, you can only select one of them. Once the media type
is selected, the attributes of the port, for example, status,
duplex, flow control, and rate, all mean those of the
currently selected media type. After the port type is
changed, the attributes of the new port type take the
default values, which can be modified as needed.
Ruijie(config)# interface gigabitethernet 1/1
Ruijie(config-if)# medium-type copeer
Command Description
Show the interface information.
show interfaces
-
Parameter Description
64 to 9216 (or 65536, which varies by
num
products)
By default, the num is 1500.