Ruijie Networks RG-S2600E Series Cli Reference Manual page 945

S2600E CLI Reference Guide
2.2.11 interface rate-limit
Use this command to configure rate limitation on the interface. Use the no form
of the command to restore it to the default.
rate-limit {input | output} bps burst-size
no rate-limit
Parameter
description
Command
mode
Examples
Related
commands
2.2.12 mls qos scheduler
Use this command to configure the queue scheduling algorithm. Use the no
form of the command to restore it to the default.
mls qos scheduler [sp | rr | wrr | drr]
no mls qos scheduler
Parameter
description
Chapter 2 QoS Configuration Command
Parameter Description
input Specify the input speed limit.
output Specify the output speed limit.
bps Bandwidth limitation per second
burst-size Burst traffic limit (Kbyte). Its range
varies with products.
no Restore to the default value.
Interface configuration mode.
Ruijie(config)# interface fastEthernet 0/1
Ruijie(config-if)# rate-limit input 1000000 4096
show mls qos interface.
Parameter Description
sp Absolute priority scheduling
rr Round-robin scheduling
Frame
wrr
scheduling
drr Frame length weighted round-robin
scheduling
count weighted round-robin