Ruijie Networks RG-S2600E Series Cli Reference Manual page 15

S2600E/P CLI Reference Guide
Commands
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.5
To enable or disable the specified service such as SSH Server/Telnet
Server/Web Server/SNMP Agent, use the enable service command in the
global configuration mode:
enable service { ssh-sesrver | telnet-server | web-server | snmp-agent}
Parameter
description
Global configuration mode.
The password falls into "password" and "security"
passwords.
password, which can be set only for level 15. The
"security" means the security encryption password, which
can be set for level 0 ~ 15. If the two kinds of passwords
exist in the system at the same time, the "password" type
password will not take effect. If a "password" type
password is set for a level other than 15, an alert is
provided and the password is automatically converted into
the "security" password. If "password" type password is
set for level 15 and the same as the "security" password,
an alert is provided. The password must be saved in
encrypted manner, with simple encryption for the
"password" type password and security encryption for the
"security" type password.
The example below configures the security password as
pw10:
Ruijie(config)# enable secret 0 pw10
Command
enable
password
enable service
Keyword
ssh-server
telnet-server
Chapter 2 Switch Management Configuration
The "password" is
Description
Set passwords for different privilege
levels.
Description
Enable SSH Server, and the IPv4 and
IPv6 services are enabled at the same
time.
Enable Telnet Server, and the IPv4 and
IPv6 services are enabled at the same
time.
simple encryption