Information Option - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
13.1.7 ipv6 dhcp snooping

information option

Use this command to enable the function of adding the option18/37 into the DHCPv6 request
packets. The no form of this command will disable this funtion.
[no] ipv6 dhcp snooping information option [standard-format]
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
Chapter 13 DHCPv6 Snooping Configuration Commands
Parameter
standard-format
Disabled.
Global configuration mode.
With this command configured, the option18/37 will be
added to the DHCPv6 request packets and the DHCPv6
server will assign the addresses according to the
option18/37 information.
The following example configures the function of adding
the option18/37 into the DHCPv6 packets.
Ruijie# configure terminal
Ruijie(config)# ipv6 dhcp snooping information option
Ruijie(config)# end
Ruijie# show ipv6 dhcp snooping
Switch DHCPv6 snooping status ：ENABLE
DHCPv6 snooping vlan: 1-4094
DHCPv6 snooping database write-delay time: 0 seconds
DHCPv6 snooping option 18/37 status: ENABLE
DHCPv6 ignore dest-not-found :DISABLE
DHCPv6 snooping link detection :DISABLE
Interface
---------------------- -------
FastEthernet0/10
Command Description
Description
The Option18/37
standard format.
Trusted Filter DHCP
---------
yes DISABLE
uses the