Ruijie Networks RG-S2600E Series Cli Reference Manual page 676

S2600E CLI Reference Guide
7.1.8 switchport port-security
mac-address interface
Use this command to configure manually the static secure address in the privileged mode. Use
the no form of the command to remove the configuration.
[no] switchport port-security interface interface-id mac-address mac-address [vlan vlan-id]
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Chapter 7 Port-based Flow Control Configuration Commands
switchport
port-security
switchport
port-security binding
switchport
port-security
mac-address interface
switchport
port-security aging
Parameter
interface-id
mac-address
vlan-id
N/A.
Privileged mode.
N/A.
The example below describes how to configure a static secure
address 00d0.f800.5555 with VID 2 for interface g 0/10:
Ruijie(config)# switchport port-security interface g0/10
mac-address 00d0.f800.5555 vlan 2
Enable the port-security.
Configure the secure address
binding.
Set the static secure address in
the privileged mode.
Set the aging time for the
secure address.
Description
Interface ID.
Static secure address
Vlan ID of the MAC address.
Note: the configuration of
vlan-id is only supported on
the TRUNK port.