S2600E/P CLI Reference Guide
commands
1.1.28
ip igmp snooping vlan querier timer expiry
To specify the expiration timer for non-querier, execute the global configuration
command of "ip igmp snooping vlan querier timer expiry". Use no form of
this command to restore to the default value.
ip igmp snooping vlan vid querier timer expiry num
no ip igmp snooping vlan vid querier timer expiry
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
Chapter 1 IGMP Snooping Commands
ip igmp snooping querier
query-interval
Parameter
vid
num
Default value
Global configuration mode.
After globally enabling the IGMP querier, if the device is
elected as a non-querier, execute this command to
change the expiration timer for non-querier.
If
expiration
timer
corresponding VLAN, the value specified in VLAN will be
used first.
The following example configures the non-querier
expiration timer for a specific VLAN:
Ruijie(config)# ip igmp snooping vlan 3 querier timer
expiry 60
Command
Globally configure the
query interval
Description
VLAN ID
Non-querier
timer
(60-300);
second;
default:
seconds
has
been
configured
Description
expiration
unit:
125
in
the
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?