Table Of Contents - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
3.1.2
Use this command to configure the low and high threshold of the cpu log
utilization limit manually.
cpu-log log-limit low_num high_num
Parameter
description
Chapter 3 CPU-LOG Configuration Commands
100 4%
101 0%
102 0%
103 0%
104 0%
105 0%
106 0%
107 0%
108 0%
109 0%
110 1%
111 0%
112 75% 80%
In the list above, the first 3 lines indicates the system CPU
utilization in 5sec, 1min and 5min, including LISR, HISR and
task. Then, it describes the detailed CPU utilization
distribution:
 No：Sequence number
 5Sec：CPU utilization of the tasks in 5sec.
 1Min：CPU utilization of the tasks in 1min.
 5Min：CPU utilization of the tasks in 5min.
The first 2 lines in the list above indicate the CPU utilization
of all LISRs and HISRs. From the 3
to the CPU utilization of the tasks. The last line refers to the
CPU utilization of the idle task, which is the same as the
"System Idle Porcess" in the Windows. In the example
above, CPU utilization of idle task within 5s is 75%,
indicating that 75% CPU is idle.
cpu-log
Parameter
log-limit
low_num
2% 1% datapkt_rcv_thread
0% 0% keepalive_link_notify
0% 0% rerp_msg_recv_thread
0% 0% ip_scan_guard_task
0% 0% ssp_ipmc_hit_task
0% 0% ssp_ipmc_trap_task
0% 0% hw_err_snd_task
0% 0% rerp_packet_send_task
0% 0% idle_vlan_proc_thread
0% 0% cmic_pause_detect
1% 1% stat_get_and_send
1% 0% rl_con
90% idle
Description
The command descriptor prompting the
log limit.
Set the low threshold of the cpu log
utilization limit.
rd
line, it begins to refer