Ruijie Networks RG-S2600E Series Cli Reference Manual page 527

S2600E CLI Reference Guide
2
2.1 Configuration Related
Commands
2.1.1 ip radius source-interface
Use this command to specify the source IP address for the RADIUS packets. Use the no form
of this command to delete the source IP address for the RADIUS packet.
ip radius source-interface interface
no radius source-interface
Parameter
Parameter
Interface
description
The source IP address of the RADIUS packet is set by the
Default
network layer.
Command
Global configuration mode.
mode
In order to reduce the NAS information to be maintained
on the RADIUS server, use this command to set the
Usage source IP address of the RADIUS packet. This command
guidelines uses the first IP address of the specified interface as the
source IP address of the RADIUS packet. This command
is used in the layer 3 devices.
The following example specifies that the RADIUS packet
obtains an IP address from the fastEthernet 0/0 interface
Examples
and uses it as the source IP address of the RADIUS
packet:
Chapter 2 RADIUS Configuration Commands
RADIUS
Commands
Description
Interface that the source IP address of
the RADIUS packet belongs to.
Configuration