Ruijie Networks RG-S2600E Series Cli Reference Manual page 464

S2600E/P CLI Reference Guide
Usage
guidelines
Examples
Related
commands
2.1.12 ipv6 mld snoopin fast-
Use this command to enable the mld snooping fast-leave in the global
c onfigurat
i pv6 mld sn
no ipv6 mld snooping fast-leave enable
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Use this command to set the interface as the member port
of multiple s
T he followi
fastEthernet 0/1 as the static member port of the FF88::1
group:
Ruijie(config)#
interface fastEthernet
Command
ipv6 mld snooping vlan mrouter
interface
g leave enable
ion mode. Use the no form of this command to disable this function.
ooping fast-l eave enable
Parameter
-
N/A
Global config
The interface fast leave is that when IPv6 MLD Leave
packets sent from the host are received on an interface,
the interfac
the corresponding forwarding entry. Then, the switch will
not forward the received IPv6 MLD specific group query
packets to the interface. If there is only one receiver
connected with th
leave function to sa
The following example shows how to enable mld snooping
fast-leave:
Ruijie(config-if)# ipv6
Chapter 2 MLD Snooping Commands
tatic multicast addresses.
ng example shows how to set the interface
ipv6 mld snooping vlan 1 static FF88::1
0/1
Description
-
uration mode.
e is removed form the outgoing interface list of
e interface, enable the interface fast
ve the bandwidth and resources.
mld snooping fast-leave
Description
Set the mrouter
interface.