Ruijie Networks RG-S2600E Series Cli Reference Manual page 268

S2600E/P CLI Reference Guide
3.1.3 ipv6 enable
Use this command to enable the IPv6 function on an interface. Use the no form
of this command to disable this function.
ipv6 enable
no ipv6 enable
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
3.1.4 ipv6 general-prefix
Use this command to configure the IPv6 general prefix in the global
configuration mode.
ipv6 general-prefix prefix-name ipv6-prefix/prefix-length
no ipv6 general-prefix prefix-name ipv6-prefix/prefix-length
Parameter
description
Chapter 3 IPv6 Configuration Commands
Disabled.
Interface configuration mode.
The IPv6 function of an interface can be enabled by
configuring ipv6 enable or by configuring IPv6 address for
If an IPv6 address is configured for the
interface, the IPv6 function will be enabled
automatically on the interface and cannot
Caution
be disabled with no ipv6 enable.
the interface.
Ruijie(config-if)# ipv6 enable
Command Description
show ipv6 Show the related information of an
interface interface.
Parameter
prefix-name
Description
The general prefix name.