Ruijie Networks RG-S2600E Series Cli Reference Manual page 659

Table of Contents

Advertisement

S2600E CLI Reference Guide
6
6.1
Related Configuration Commands
The GSN configuration commands include global configuration commands and interface mode
configuration commands.
6.1.1
security address-bind enable
Use this command to enable the security address-bind policy in the interface configuration
mode. Use the no form of this command to disable this function.
security address-bind enable
no security address-bind enable
Default
Command
mode
Usage
guidelines
Examples
Related
commands
6.1.2
security community
Use this command to configure the security community for the communication with smp
server.
security { [ v1 | v2 ] community community | v3 user username }
no security { [ v1 | v2 ] community community | v3 user username }
Chapter 6 GSN Configuration Commands
GSN Configuration Commands
N/A.
Interface configuration mode, support L2 switch port
excluding AP and AP member port.
It is worth mentioning that this command takes effect only
after the GSN function is enabled.
Ruijie(config-if)# security address-bind enable
Command
security
gsn
enable
Description
Enable the global GSN switch.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the RG-S2600E Series and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents