S2600E CLI Reference Guide
2.2.14
mls qos map ip-prec-dscp
Use this command to map the IP-precedence to the DSCP value. Use the no
form of this command to disable the mapping.
mls qos map ip-prec-dscp dscp1...dscp8
no mls qos map ip-prec-dscp
Parameter
description
Default
configuration
Command
mode
Examples
Related
commands
2.2.15
virtual-group
Use this command to configure a physical port or Aggregate port as the
member port of a virtual group. Use the no form of this command to remove the
member attribute of a virtual group on the port.
virtual-group virtual-group-number
no virtual-group virtual-group-number
Parameter
description
Default
configuration
Chapter 2 QoS Configuration Command
Parameter
Description
dscp
Specify the DSCP value.
no
Restore to the default value.
See the default configuration.
Global configuration mode.
Ruijie(config)# mls qo map ip-prec -dscp 8 10 16 18 24 26
32 34
Command
Description
Show the DSCP-COS, COS-DSCP and
show mls qos
IP-prec-DSCP maps.
maps
Parameter
virtual-group-number
By default, the physical port belongs to no virtual-group.
Description
Virtual group number, up to 128.
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?