Vlan Configuration - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E/P CLI Reference Guide
5
5.1 Configuration Related Commands
5.1.1 add
Use this command to add one or a group Access interface into current VLAN.
Use the no form of the command to remove the Access interface.
add interface { interface-id | range interface-range }
no add interface { interface-id | range interface-range }
Parameter
description
Default
configuration
Command
mode

VLAN Configuration

Commands
Parameter
interface-id
range
interface-range
All layer-2 Ethernet interfaces are in the VLAN1.
VLAN configuration mode.
Chapter 5 VLAN Configuration Commands
Description
Layer-2 Ethernet interface or layer-2 AP
port.
Range of the Layer-2 Ethernet interface
or layer-2 AP port.