Ruijie Networks RG-S2600E Series Cli Reference Manual page 183

S2600E/P CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
Chapter 9 Voice VLAN Configuration Commands
Parameter
-
Enabled
Global configuration mode.
The Voice VLAN working mode can be classified into the
auto-mode and the manual-mode, and configured on the
port. The working modes for the Voice VLAN on each port
are independent, and different ports can work in different
working modes. In different working modes, the methods
of enabling the Voice VLAN function on the port are
different. The working mode can be set according to the IP
phone type connected downward the port or the port type.

Caution
You are not recommended to transmit the voice and
service data in the Voice VLAN at the same time. But if it
is necessary for you, you shall ensure that the Voice
VLAN security mode has been disabled.

Note
In the security mode, only the source MAC addresses for
the untagged packets and the packets carried with Voice
VLAN tag are checked. For other packets carried with
non-voice vlan tag that free from the Voice VLAN
security/normal mode, the devices forward or discard
those packets according to the VLAN rule.
The following example shows how to enable the Voice
VLAN security mode:
Ruijie(config)# voice vlan security enable
Command
show voice vlan
Description
-
Description
Show Voice VLAN configurations
and the current state.