Ruijie Networks RG-S2600E Series Cli Reference Manual page 89

S2600E/P CLI Reference Guide
Command
mode
Usage
guidelines
Examples
Related
commands
Platform
description
1.1.8 interface fastEthernet
Use this command to select a Ethernet interface, and enter the interface
configuration mode.
interface fastEthernet mod-num/port-num
Parameter
description
Command
mode
Usage
guidelines
Examples
Chapter 1 Interface Configuration Commands
Global configuration mode.
According to some rules, you can add other ports to an
aggregate port. All the port members of an aggregate port
are considered in a whole, and their attributes depend on
the ones of the aggregate port. You can use show
interfaces or show interfaces aggregateport commands
to display the interface configuration.
Ruijie(config)#interface aggregateport 3
Ruijie(config-if)#
Command Description
Show the interface information.
show interfaces
-
Parameter
mod-num/port-num
Global configuration mode.
The no form of the command is not available, and this
interface type cannot be deleted. Use show interfaces or
show interfaces fastEthernet to display the interface
configurations.
Ruijie(config)# interface fastEthernet 1/2
Ruijie(config-if)#
Description
The range depends on the device
and the extended module.