Ruijie Networks RG-S2600E Series Cli Reference Manual page 238

S2600E/P CLI Reference Guide
show interface intf-name remark
Parameter
description
Default
configuration
Command
mode
Examples
Platform
description
12.2.6 show l2protocol-tunnel
Use this command to show transparent transmission configuration of L2
protocol.
show l2protocol-tunnel { gvrp | stp }
Parameter
description
Default
configuration
Command
mode
Examples
Chapter 12 QinQ Configuration Commands
Parameter
-
N/A.
Privileged mode.
Ruijie# show interface intf-name remark
Ports Type
------------ ----------- ----------- --------
Gi0/1 Cos-To-Cos 3
The software version must be RGOS10.1 and later.
Parameter
gvrp
stp
N/A .
Privileged mode.
Ruijie# show l2protocol-tunnel stp
Description
-
From value To value
5
Description
Show configuration of transparently
transmitting gvrp protocol.
Show configuration of transparently
transmitting stp protocol.