Default Configuration - Ruijie Networks RG-S2600E Series Cli Reference Manual

S2600E CLI Reference Guide
2
2.1

Default Configuration

Before configuring QoS, you must have a full knowledge of these items related
to QoS:
1. One interface can only be associated with one policy map at most.
2. One policy map may own many class maps
3. One class map can be associated with only one ACL, and all the ACEs of
this ACL must have the same filter domain template.
4. The number of ACEs associated with an interface complies with the
restriction given in "Configuring Security ACLs".
The QoS function is disabled by default. Namly the device processes all the
packets in the same way. But if you associate a policy map with an interface and
the trust mode on one interface, the QoS of this interface is enabled
automatically. To disable the QoS function of the interface, simply resolve the
policy map setting of the interface and set the information mode of the interface
to Off. Below is the default QoS configuration:
Default CoS value
Queue Number
Queue Scheduling
QueueWeight
WRR Weight Range
DRR Weight Range
Trust mode
Default CoS to queue mapping table:
CoS Value
Queue
QoS
Command
0
8
WRR
1:1:1:1:1:1:1:1
1:15
1:15
No Trust
0 1 2
1 2 3
Chapter 2 QoS Configuration Command
Configuration
3 4 5
4 5 6
6 7
7 8