Ruijie Networks RG-S2600E Series Cli Reference Manual page 574

S2600E CLI Reference Guide
4.5.10 dot1x dynamic-vlan
enable
Use this command to enable dynamic VLAN. Use the no form of the command to disable the
function.
dot1x dynamic-vlan enable
no dot1x dynamic-vlan enable
Parameter
N/A.
description
Default Disabled.
Command
mode Interface configuration mode.
Usage Use the show dot1x dynamic-vlan command to show the
802.1X configuration.
guidelines
The following example enables dynamic VLAN:
Ruijie# configure terminal
Ruijie(config)# interface gigabitEthernet 4/5
Examples
Ruijie(config-if)# dot1x dynamic-vlan enable
Ruijie(config)# end
Ruijie#
Command
Related
commands
show dot1x
4.5.11 dot1x guest-vlan
Use this command to set whether to allow guest vlan jump. Use the no form of the command
to disable the function.
dot1x guest-vlan vid
no dot1x guest-vlan
Parameter
Parameter
description
vid
Chapter 4 802.1X Configuration Commands
Description
Show the information about 802.1x.
Description
In the range from 1 to 4094.