Ruijie Networks RG-S2600E Series Cli Reference Manual page 900

S2600E CLI Reference Guide
Platform
description
1.1.6 ip access-list
Use this command to create a standard IP ACL or extended IP ACL. Use the no
form of the command to remove the ACL.
ip access-list {extended | standard} {id|name}
no ip access-list {extended | standard} {id|name}
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Chapter 1 ACL Configuration Commands
The software version must be RGOS10.0 and higher.
Parameter Description
id ID of the ACL 1 to 99 and 1300 to 1999
for standard ACL) or 100 to 199 and
2000 to 2699 for extended ACL
name Name of the ACL
N/A.
Global configuration mode.
There are differences between a standard ACL and an
extended ACL. The extended ACL is more precise. Refer
to deny or permit in the two modes. Use show
access-lists to display the ACL configurations.
Create a standard ACL:
Ruijie(config)# ip access-list extended 123
Ruijie(config-ext-nacl)# show access-lists
ip access-list extended 123
Ruijie(config-ext-nacl)#
Create an extended ACL:
Ruijie(config)# ip access-list standard std-acl
Ruijie(config-std-nacl)# show access-lists
ip access-list standard std-acl
Ruijieconfig-std-nacl)#
to 2699, 3000 to 3199).