Ruijie Networks RG-S2600E Series Cli Reference Manual page 428

S2600E/P CLI Reference Guide
commands
1.1.14 ip igmp snooping querier query-interval
To specify the interval for IGMP querier to send query packets, execute the
global configuration command of "ip igmp snooping querier query-interval".
Use no form of this command to restore the query interval to the default value.
ip igmp snooping querier query-interval num
no ip igmp snooping querier query-interval
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
Chapter 1 IGMP Snooping Commands
ip igmp snooping vlan querier
max-response-time
Parameter
num
Default value
Global configuration mode.
After globally enabling IGMP querier, the timer will be
enabled for sending query packets periodically. The aging
time of the timer is the query interval. Configure this
command to change the query interval.
If the query interval has been configured in the
corresponding VLAN, the value specified in VLAN will be
used first.
The following example configures the query interval on the
device:
Ruijie(config)# ip igmp snooping querier query-interval
100
Command
Configure the maximum
response time to query
packets in VLAN
Description
Query interval
(1-18000); unit: second;
default: 60 seconds
Description