Ruijie Networks RG-S2600E Series Cli Reference Manual page 560

S2600E CLI Reference Guide
Client Oline Probe:
Eapol Tag Enable:
Authorization Mode:
Command
Related
commands
show dot1x
4.2.5 dot1x timeout tx-period
Use this command to set the interval of transmitting packets after the maximum number of
retransmission times is configured. Use the no form of the command to restore it to the default
setting.
dot1x timeout tx-period seconds
no dot1x timeout tx-period
Parameter
Parameter
description
seconds
3 seconds.
Default
Command
mode Global configuration mode.
Usage
guidelines Use show dot1x command to show 802.1X configuration.
The following example sets the interval of retransmission
to 10s:
Ruijie# configure terminal
Ruijie(config)# dot1x timeout tx-period 10
Ruijie(config)# end
Ruijie# show dot1x
802.1X Status:
Examples
Authentication mode: EAP-MD5
Authed User Number:
Re-authen Enabled:
Re-authen Period:
Quiet Timer Period:
Tx Timer Period:
Supplicant Timeout:
Server Timeout:
Chapter 4 802.1X Configuration Commands
Disabled
Disabled
Group Server
Description
Show the information about 802.1x.
Description
Period of retransmission. The range is
from 0 to 65535 seconds.
Enabled
0
Disabled
1000 sec
1000 sec
10 sec
10 sec
10 sec