Ruijie Networks RG-S2600E Series Cli Reference Manual page 534

S2600E CLI Reference Guide
Parameter
time seconds
Parameter
description
tries number
time seconds: 60s.
Default
tries number: 10.
Command
Global configuration mode.
mode
If a Radius server meets the timeout and timeout times at
Usage the same time, it is considered to be unreachable. This
guidelines command is used to adjust the parameter conditions of
timeout and timeout times.
The following example sets the timeout to 120s and
timeout times to 20.
Examples
Ruijie(config)# radius-server dead-criteria time 120
tries 20
Command
radius-server
host
Related
radius-server
commands
deadtime
radius-server
timeout
Chapter 2 RADIUS Configuration Commands
Description
Configure the timeout value. If the
device does not receive a correct
response packet from the Radius server
within the specified time, the Radius
server is considered to be unreachable.
The value is in the range of 1s to 120s.
Configure the successive timeout times.
When sending a request from the
device to the Radius server times out
for the specified times, the device
considers that the Radius server is
unreachable. The value is in the range
of 1 to 100.
Description
Define the RADIUS security server.
Define the duration when a device
stops sending any requests to an
unreachable Radius server.
Define the timeout for the packet
retransmission.