Ruijie Networks RG-S2600E Series Cli Reference Manual page 196

S2600E/P CLI Reference Guide
10.1.10 spanning-tree mst priority
Use this command to set the device priority for different instances in the global
configuration mode. Use the no form of the command to restore it to the default
setting.
spanning-tree [mst instance-id] priority priority
no spanning-tree [mst instance-id] priority
Parameter
description
Default
configuration
Command
mode
Examples
Related
Chapter 10 MSTP Configuration Commands
show
spanning-tree mst
spanning-tree mst
cost
spanning-tree mst
priority
Parameter
instance-id
priority
The default instance ID is 0.
The default device priority is 32768.
Global configuration mode.
The following example sets the device priority of the
Instance as 8192.
Ruijie(config-if)# spanning-tree mst 20 priority 8192
You can verify your settings by entering the show
spanning-tree mst
command in the privileged EXEC mode.
Command
Show the MSTP information of an
interface.
Set the path cost.
Set the device priority for different
instances.
Description
Instance ID in the range of 0 to 64
Device priority. Sixteen integers are
available: 0, 4096, 8192, 12288,
16384, 20480, 24576,
32768, 36864, 40960,
49152,53248, 57344 and 61440,
which are all multiples of 4096.
instance
interface
Description
28672,
45056,
instance-id