Ruijie Networks RG-S2600E Series Cli Reference Manual page 170

S2600E/P CLI Reference Guide
7.1.2 mac-vlan mac-address
Use this command to configure the static MAC VLAN entries manually in the
global configuration mode.
mac-vlan mac-address mac-address [mask mac-mask] vlan vlan-id [priority
pri_val]
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Chapter 7 MAC VLAN Configuration Commands
Parameter Description
Specify the MAC address.
mac-address
mac-address
Specify the MAC address mask, with the
mask
high bits being all 1 in binary. This field is
mac-mask
full of Fs by default.
Specify the VLAN corresponding to the
vlan vlan-id
MAC address, in the range of 1 to 4094.
Specify the 802.1p priority of the VLAN
priority pri_val
corresponding to the MAC address, in
the range of 0 to 7. The default value is
0.
No static MAC-VLAN entry is configured by default.
Global configuration mode.
The mac-vlan mac-address command is used to configure
the VLAN corresponding to the MAC address and its priority.
The no mac-vlan command is used to delete the relationship
between the MAC address and VLAN.