Ruijie Networks RG-S2600E Series Cli Reference Manual page 114

S2600E/P CLI Reference Guide
Commands
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.11 mac-address-table filtering
Use this command to configure the filtering MAC address. Use the no form of
the command to remove the filtering address.
mac-address-table filtering mac-address vlan vlan-id [source | destination]
no mac-address-table filtering mac-address vlan vlan-id
Parameter
description
Default
configuration
Chapter 2 MAC Address Configuration
Global configuration mode.
Use show mac-address-table aging-time to display
configuration.
Use show mac-address-table dynamic to display the
dynamic MAC address table.
Ruijie(config)# mac-address-table aging-time 150
Command
show
mac-address-table
aging-time
show
mac-address-table
dynamic
Parameter
mac-address
vlan vlan-id
source
destination
No filtering address is configured by default.
When configuring this command without the source or
destination specified, the frame received in the specified
VLAN, which has the same source/destination MAC
address with the specified MAC address, will be filtered.
Description
Use this command to display the
aging time of the dynamic MAC
address.
Use this command
dynamic MAC address.
Description
Filtering Address
VLAN ID. Its range depends on
the switch.
Filter the frame according to the
souce MAC address only.
Filter the frame according to the
destination MAC address only.
to display