Ruijie Networks RG-S2600E Series Cli Reference Manual page 824

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.6.4 nfpp nd-guard enable
Use this command to enable the ND anti-attack function on the interface.
nfpp nd-guard enable
Chapter 15 NFPP Configuration Commands
Parameter Description
Set
ns-na
neighbor advertisement.
rs Set the router request.
Set the router advertisement and the
ra-redirect
redirect packets.
Set the attack threshold, in pps. The
pps
valid range is [1,9999].
By default, the default rate-limit threshold for the ns-na, rs
and ra-redirect on each port is 15.
NFPP configuration mode.
N/A
Ruijie(config)# nfpp
Ruijie(config-nfpp)# nd-guard rate-limit per-port ns-n
a 10
Ruijie(config-nfpp)# nd-guard rate-limit per-port rs 5
Ruijie(config-nfpp)#
ra-redirect 5
Command
nfpp nd-guard policy
show nfpp nd-guard
summary
the neighbor request
nd-guard rate-limit
Description
Set the rate limit and the attack
threshold.
Show the configurations.
and
per-port