Ruijie Networks RG-S2600E Series Cli Reference Manual page 828

S2600E CLI Reference Guide
Parameter
description
Default
Settings
Command
mode
Usage
guidelines
Examples
Related
commands
15.7.3 isolate-period
Use this command to set the isolate time.
isolate-period {seconds | permanent}
Parameter
description
Default
Settings
Command
mode
Chapter 15 NFPP Configuration Commands
Parameter Description
name
Define guard name
N/A
NFPP configuration mode.
This command takes effect only after the match, rate-out,
rate-limit and attack-threshold have been configured.
Ruijie(config)# nfpp
Ruijie(config-nfpp)#define tcp enable
Command
show nfpp define
summary
Parameter Description
seconds
Set the isolate time, in seconds. The
valid range is 0 or [30, 86400]. 0 for no
isolation.
permanent
Permanent isolation.
The default isolate time is 0, which means no isolation.
NFPP define configuration mode.
Description
Show the user-defined
anti-attack configurations