Ruijie Networks RG-S2600E Series Cli Reference Manual page 632

S2600E CLI Reference Guide
Configuration
Example
Related
Commands
Platform
Description
5.1.10 web-auth
offline-detect-mode flow
This command is used to check whether a user is offline based on the
user's traffic. The no form of this command is used to disable user's online
status check based on traffic.
web-auth offline-detect-mode flow
no web-auth offline-detect-mode flow
Parameter
Description
Default
Configuration
Command
Mode
Use Guide
Chapter 5 Web Authentication Configuration Commands
Example 1: Set the user using the IP address 172.16.0.1 to be
free of authentication.
Ruijie(config)# web-auth direct-host 172.16.0.1
Command
show web-auth
direct-host
None
Parameter
None
User's online status check based on traffic is disabled.
Global configuration mode
Currently, the following methods are used to check whether a user
is offline:
1) The user clicks Log off on the authentication page or the
authentication page is forced to close.
2) Link-based check: When the access device detects that the
Description
View the users
authentication.
Description
free of Web