Ruijie Networks RG-S2600E Series Cli Reference Manual page 131

S2600E/P CLI Reference Guide
Commands
3
3.1 Configuration Related Commands
3.1.1 aggregateport load-balance
Specify a load-balance algorithm. Use the no command to return it to the
default setting.
aggregateport load-balance {dst-mac | src-mac | src-dst-mac | dst-ip |
src-ip | src-dst ip }
no aggregateport load-balance
Parameter
description
Aggregate Port
Configuration Commands
Parameter
dst-mac
src-mac
Chapter 3 Aggregate Port Configuration
Description
Traffic is distributed according to the
destination MAC addresses of the
incoming packets. For all the links of an
aggregate port, the messages with the
same destination MAC addresses are
sent to the same port, and those with
different destination MAC addresses
are sent to different ports.
Traffic is distributed according to the
source MAC addresses of the incoming
packets. For all the links of an
aggregate port, the messages from
different addresses are distributed to
different ports, and those from the
same addresses are distributed to the
same port.