S2600E/P CLI Reference Guide
Platform
description
12.1.2
frame-tag tpid tpid
Use this command to set the manufacturer tpid.
frame-tag tpid <tpid>
no frame-tag tpid
Parameter
description
Command
mode
Examples
Related
commands
Platform
description
12.1.3
inner-priority-trust enable
Use this command to copy the priority of the inner tag to the outer tag of the
packets on the interface.
inner-priority-trust enable
no inner-priority-trust enable
Chapter 12 QinQ Configuration Commands
show interface
intf-name remark
-
Parameter
no
Interface configuration mode.
Ruijie(config)# interface g0/3
Ruijie(config-if)# frame-tag tpid 0x9100
Ruijie(config-if)# end
Ruijie# show frame-tag tpid
Port
tpid
------ ---------
Gi0/3
0x9100
Command
show frame-tag tpid
The software version must be RGOS10.1 and later.
-
Description
Remove the setting.
Description
-
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?