S2600E/P CLI Reference Guide
Commands
2.1.7
When using the Http Server, it needs to perform the logon authentication to
enter the Web page. Use this command to set the mode of Web logon
authentication.
ip http authentication {enable | local }
Parameter
description
Default
Command
mode
Usage
guidelines
Examples
Related
commands
2.1.8
To set the port of the HTTP service ,use this command in the global
configuration mode:
ip http port number
ip http
authenticatio
n
Keyword
enable
local
enable
Global configuration mode.
This command is used to set the mode of Web logon
authentication. Use the no ip http authentication
command to restore it to the default setting.
The example below sets the mode of Web logon
authentication as local:
Ruijie(Config)# ip http authentication local
Command
enable service
ip http port
Chapter 2 Switch Management Configuration
Description
Use the password set by the enable
password or enable secret, the password
must be of the level15.
Use the username and password set by the
local username command. The user must
bind to the privilege of level15.
Description
Enable
or
disable
service.
the
specified
Need help?
Do you have a question about the RG-S2600E Series and is the answer not in the manual?