Ruijie Networks RG-S2600E Series Cli Reference Manual page 431

S2600E/P CLI Reference Guide
Parameter
description
Default
configuration
Command
mode
Usage
guidelines
Examples
Related
commands
1.1.18 ip igmp snooping source-check port
The source port check function is used to permit one or several IPMC flows
from the mroute port.To configure the source port check function of IGMP
snooping, execute the ip igmp snooping source-check port command in the
global configuration mode. The no form of this command is used to disable the
source port check function.
ip igmp snooping source-check port
no ip igmp snooping source-check port
Chapter 1 IGMP Snooping Commands
Parameter
time
10s.
Global configuration mode.
You can specify the time for the switch to wait for the
member join message after receiving the query message.
If the switch does not receive the member join message in
the specified time, it considers that the member has left
and then deletes the member. This command lets you
adjust the waiting time after receiving the query message.
Set the aging time of the routing interface that the switch
learns dynamically to 100s.
Ruijie(config)# ip igmp snooping query-max-response-time
100
Command
ip igmp snooping
Description
The aging time of the routing
inerface that the switch learns
dynamically.
Function
Configure a multicast routing
interface.