Ruijie Networks RG-S2600E Series Cli Reference Manual page 421

S2600E/P CLI Reference Guide
Related
commands
1.1.6 ip i gmp snooping ivgl
To enable IGMP snoop
snooping ivgl comman
command is used to disable IGMP snooping.
ip igmp snooping iv
n o ip igmp snooping
Paramet
description
Default
Command
mode
Usage
guidelines
Examples
1.1.7 ip i gmp snooping max-groups
To configure the maximum number of groups that can be added dynamically to
this interface, execute the ip igmp snoo
interface configuration mode. The no
the configuration.
ip igmp snooping max-g
no ip igmp snooping max-groups
Parameter
description
Command
ip igmp profile
ing and enter the IVGL mode, execute the ip igmp
d in the global configuration mode. The no form of this
gl
er
N/A.
Disabled.
Global configuration mode.
After this mode
multicast address yet in different VLANs, the IGMP
snooping function handles only the same group as that in
the multicast address table (GDA), other multicast frames
are forwarded.
The followi
snooping and enter the IVGL mode:
Ruijie(config)# ip igmp snooping ivgl
roup s numbe
Parameter
number
Chapter 1 IGMP Snooping Commands
Description
Create a profile.
is set, for multicast frames with the same
ng example demonstrates how to enable IGMP
ping max-groups command in the
form of this command is used to remove
r
Description
The parameter ranges 0 to