Ruijie Networks RG-S2600E Series Cli Reference Manual page 935

S2600E CLI Reference Guide
Default CoS to DSCP mapping table
CoS Value
DSCP value
Default IP Precedence to DSCP mapping table
IP-Precedence
DSCP
Default DSCP to CoS mapping table
DSCP
CoS
2.2 Related Configuration Commands
2.2.1
Use this command to configure the trust mode on an interface. Use the no form
of this command to restore it to the default.
mls qos trust [cos | dscp | ip-precedence]
no mls qos trust
Parameter
description
Default
configuration
0 1
0 8
0 1
0 8
0 8 16
0 1 2
mls qos trust
Parameter
cos
dscp
ip-precedence
no
N/A.
Chapter 2 QoS Configuration Command
2 3 4
16 24 32
2 3 4
16 24 32
24 32
3 4
Description
The QoS trust mode of the port is
CoS.
The QoS trust mode of the port is
DSCP.
The QoS trust mode of the port is
IP-PRE.
Restore it to the default value.
5 6 7
40 48 56
5 6 7
40 48 56
40 48 56
5 6 7